The Respironics DC Power Cord is perfect for frequent travelers, campers, and long-distance truck drivers. This cord can be used to operate Respironics CPAP and BiPAP Systems where AC power is not available. It plugs into a standard cigarette lighter socket found in automotive vehicles. The cord comes with the 3-amp fuse installed and includes a 5-amp and a 7-amp fuse as well. The configuration of your CPAP setup will determine the amperage. Please check your user manual for exact specifications. When in doubt, use the 7-amp fuse for all configurations.
If you are looking to use this cord with battery terminals, please see the Respironics Shielded 12V DC Power Cord with Battery Adapter.
Note: Use of a humidifier while operating on DC power is NOT recommended.
Compatible Respironics models:
Other compatible models:
- All REMStar M-Series
- REMStar System One (50 Series Only - Pre July 2012 - SEE BELOW)
- REMStar BiPAP Synchrony
- REMStar BiPAP Synchrony ST
- Respironics SleepEasy
- REMStar Plus/Pro (Pre-2007)
- All DeVilbiss IntelliPAP Series
Do you have a 50 or 60 Series System One CPAP?
Click to zoom.
The Respironics System One has two different series. The 50 Series was introduced in 2010 and the 60 Series was introduced in 2012. The 50 Series has a white face while the 60 Series has a darker gray face. The 60 Series has raised lettering on the lower top of the machine. You can also check the model number on the bottom of the CPAP machine. Model numbers will contain 50 or 60. The 60 Series models require a different adapter cable, part number 1097568.